At CODE 4x4 we listen to our customers. We
strive to give you a turn-key result that meets your exact expectations.
We're proud to say we achieve that goal with virtually every
project -- our customers and industry friends agree:
"Chris did a fantastic job installing
a Tera 60R front axle in my TJ, with custom fabricated long
arm suspension, coilovers and hydraulic assist steering. The
Atlas 5.0 crossmember and flat aluminum skid plate that Chris
designed and fabbed are works of art."
-- Bob Mustard
"Give him a pile of metal shavings and
he can turn them into a mechanical work of art." I've
used a similar expression many times over the years when talking
about master fabricators in magazine stories, but it doesn't
apply better to anyone I know than it does to Chris Overacker.
If there ever was a natural born, hands-on engineer, he's it.
Chris naturally applies a scientific approach to the design
of a product and a very skilled, practical approach to building
it. If he built airplanes, I'd fly in them."
--
Jim Allen, 4x4 book author and journalist
“I met Chris Overacker when I moved
to Colorado in 1993. Chris set up my Bronco (as a lot of you
may know) – and
I can definitely say the Bronco has been there, done all that – and
is still working well on even the toughest of trails. Chris
does it right the first time!”
--
Pat Gremillion, Premier Power Welder & Pull Pal, Inc
"All I needed was a set of shocks. That
was over ten years ago. I got my shocks and much, much more.
I made a friend and found a top notch mechanic. My CJ is now
a kick ass rock crawler. Chris has been there for me and my
Jeep all the way. You won’t find a more competent or professional
mechanic or fabricator anywhere! I can’t recommend his
services enough!"
-- S.V., Colorado
"Chris Overacker is a fantastic fabricator
and a perfectionist. I have complete confidence in the custom
rear suspension he and his shop built for me. If you want your
work done right the first time, take it to Chris and CODE 4x4."
--Peter
W Stewart, Carbondale, CO
"When I decided to build a real Jeep, I
went on my own and made a ton of expensive mistakes. My wife
was not impressed, and neither was my checking account. Then
I hired Chris and CODE to do some fabrication as well as
consultations. We ended up with the coolest rig you can imagine...and
we didn't go broke. Thanks Chris!"
-- W.D., Colorado
"What a difference a change in axle
ratio made This is a totally different car. I want to thank
you for good job."
-- C., Colorado
"With the vast knowledge and experience
Chris O. has accumulated over the years with ALL Jeeps, he
is certainly the one to turn to when you need one-stop shopping
and service without attitude. We have found that Chris is always
there to help and we have definitely benefited from his knowledge
over the years."
-- Jim Nollette, JKS Manufacturing, Inc
